DENAKOR SD - priming anticorrosive styrene-acrylate paint [ Výrobek nebo zboží k prodeji ]

DENAKOR SD - priming anticorrosive styrene-acrylate paint -

DENAKOR SD is a unary priming anticorrosive water diluted paint formed on the base of styrene-acrylate dispersion. It contains anticorrosive and coloured pigments, fine fillers, biocides, coalescents, and other additives modifying its properties. It contains water and a little amount of solvents on the base of glycol-ethers as thinners; it does not contain any aromatic solvents or lakbenzine.

Use: Anticorrosive protection and priming coating in building and in restoration of old coats. The paint is suitable for coating of metal sheet roofs and tinsmith’s structures, steel banisters, fences, posts and other structures outdoors as well as indoors. Water diluted acrylate enamel DENATOP R or DENATOP S UNI are recommended for the top finishing coat.

Properties:
Density: 1.15 - 1.30 kg/l
Mass dry substance: 45 - 55 %
pH 8 - 10
Volume dry substance: 35 - 45 %
After the paint becomes dry, it forms a medium-hard film, which is characterised by excellent anticorrosive properties and excellent cohesion to metal grounds.

Ground preparation: The grounds must be dry and devoid of all mechanical as well as greasy impurities, and of former paint remainders not cohesive with the ground.

Paint application: The paint is supplied in consistency for brush application, paint roller application, or spray-painting. The paint is ready for direct use without dilution before application. The temperature during application and drying must not drop below + 10 °C.

Shades: Reddish brown, light grey, black, or in shades by arrangement.

Theoretical spreading capacity: 5 - 7 m2/kg when the thickness of the dry layer is 50 m.

Packaging and storage: Sheet metal or plastic packages weighing 0.8 - 200 kg. The paint should be stored in original packages at temperatures from +5 až +25 °C, storage life min. 12 months from the date of production. The paint must not freeze.

Security and hygiene: DENAKOR SD is not harmful in the sense of valid regulations. When working, use protective aids and observe the personal hygiene principles. When spraying, protect your respiratory organs; in bounded spaces provide aeration of the workplace. If eyes are hit, wash them out properly with a large amount of clean water and seek medical treatment.

Waste liquidation: Take empty metal packages to a salvage collector, waste code: 150104. Plastic packages liquidate as other waste, waste code: 150102. Paint remainders and impure packages liquidate as dangerous waste, waste code: 080111.

INFORMATION: http://www.denascolor.cz